| File | Download |
|---|---|
| Firmware 01 New Adam 20/60 | Download |
| Instruction Manual 01 New Adam white/ Adam Cube/ Adam Minifig | Download |
| Instruction Manual 01 New Adam grey | Download |
| File | Download |
|---|---|
| Firmware 01 Adam X 20/60/80 | Download |
| Firmware 01 Adam X 20 standalone | Download |
| Firmware 01 Adam X ISO 60/80 | Download |
| File | Download |
|---|---|
| Instruction Manual 01 Adam X 80 lefty/righty build | Download |
| Instruction Manual 01 Adam X 60 | Download |
| Instruction Manual 01 Adam X 20 | Download |
| File | Download |
|---|---|
| Firmware 02 Lilith 65/75 | Download |
| Firmware 02 Lilith 60 | Download |
| Firmware 02 Lilith 60 ISO | Download |
| File | Download |
|---|---|
| Instruction Manual 02 Lilith 65/75 | Download |
| Instruction Manual 02 Lilith60 | Download |
| File | Download |
|---|---|
| Instruction Manual 03 Sachiel | Download |
| Firmware 03 Sachiel | Download |
| File | Download |
|---|---|
| Instruction Manual 04 Shamshel | Download |
| File | Download |
|---|---|
| Instruction Manual 07 Israfel | Download |
| Firmware 07 Israfel | Download |
| File | Download |
|---|---|
| Instruction manual 18 Lilin | Download |
| Firmware 18 Lilin | Download |
| Browser based | QMK | Vial |
|
1. Find the reset button. eg. ESC/Spaceback on Core64 or NumLock/- on Core17. |
| 2. Plug in the cable while holding the reset button. Release it when the “core90” drive appears. |
| 3. Flash the firmware. Drag the .uf2 firmware file into the “core90” drive. The PCB will install it and restore the factory settings. |